Chilli maintenance advice

Chilli Brush Cleaning Advice

chilli brush cleaning.pdf – 471 KB

Chilli maintenance advice.

If the Chilli Vac floor brush no longer rotates, this means that there is a reduced airflow over the motor causing the motor to overheat and stop driving the brush.
Reduced air flow is due to the filter being clogged with fine particles of dust in the pores of the pleated filter.
Your filter must be cleaned regularly for your Chilli to operate with maximum efficiency. Spare filters are provided with every Chilli.

To clean the filter.

  • Remove the debris guard and shake/wipe off dirt and rinse under a tap, leave to air-dry.
  • Use a soft ¼” or ½”paint brush/toothbrush to clean out any large debris from the filter
  • Once the large debris is removed, rinse the filter under the tap with warm water. Run the water at a reasonable pressure to push the small dust and particles out of the filter. Run the water though the recess in the back of the filter so it flows from the inside, pushing the dust/dirt back out the same way that it came into contact with the filter.
  • Leave the filter to air-dry away from direct heat sources.
  • Ensure that the filter is completely dry before re-attaching the debris guard and reusing.
  • Additional filters are available from the Ewbank services dept.

Contact Us

855-439-2265 (within US)
+1855-439-2265 (outside US)


Ewbank LLC
8261 Highway 73
Suite F
N.C. 28164

Trade Enquiries

Please visit and use our Corporate website, Ewbank Global for all trade enquiries:

Ewbank USA